0/20 SAND ACCORDING TO EN 1766 2000-03 figure A1 et figure A2
Method of testing repair and protection mortars for concrete structures
REMINDER OF THE STANDARD IN 1766 2000-03
This European standard specifies the composition, characteristics and preparation method of reference for concretes used in test methods in order to measure the performance requirements of products and systems for repairing and protecting concrete structures.
The provisions of this standard are applicable to concrete made from aggregates with a maximum dimension between 16 mm and 20 mm or from aggregates with a maximum dimension between 8 mm and 10 mm
DESCRIPTION AND COMPOSITION
The sands of S.N.L for this application:
- Siliceous base at + 98% silica.
- Rolls at 100%.
- An absorption coefficient of less than 2% (0.2%)
- Meeting the standard EN 1766 2000- respond to both formulations A1 0/8 to 10 MM and fig. A2 0/16to 20 MM
We supply this product in bags from 5kg to 25kg on request and according to your described batch to avoid as mentioned above any risk of segregation
Warning: the certificate is produced for a bag. Knowing that the particle size distribution is broad, there is a risk of segregation. It is therefore imperative to use the entire bag per batch.
